High Speed 5-Axis Machining Center

Intelligent Integrated High Speed 5 Axis Machining Center

Massive Machine Structure

  • T-shape mahcine structure, high rigidity.
  • Roller type linear guideways on three axes achieve high loading resistance, high rigidity, and long service life.
  • Coolant through ballscrew on 3 axes, high positioning accuracy.
  • Grease lubrication on 3 axes, it to reduce environmental waste pollution.

Tool Stotage System for Robot

  • Storage type tool magazine with 120 tools.
  • The touchscreen provides convenient operation and intuitive parameter setting.
  • Centeral storage system with tool life management function.

High Precision Automatic Pallet Changer (5 Pallets)

  • Shorten material preparation time.
  • The independent human machine interface.
  • The matrix type pallets.
  • Pallets size: Square pallet 450mm
  • Cutting feed rate on X, Y, Z-axis: 20 m/min
  • Rapid feed rate on X, Y, Z-axis: 45 m/min
  • Positioning accuracy : <0.005 mm (Full Stroke)
  • Repeatability accuracy: <0.004 mm (Full Stroke)

Travel (X/Y/Z) 820mm / 750 mm / 500mm
Table Area Ø600 sq.500
Max. spindle speed 15,000 rpm 24,000 rpm
Type of spindle motor Direct drive Buit in
Bearing lubrication Grease Oil Air
Spindle Oil-cooling Water cooling
Spindle taper BB / BBT-40 HSK-A63
ATC capacity 120 tools
Number of pallets 5 pallets
Pallets size Ø550 sq.450
A axis Tilting axis
Min. lnput lncrement 0.001°
Total speed reduction ratio 120/1
Max speed 25 rpm
Positioning accuracy ±8 sec
Repeatability accuracy ±5 sec
Clamping torque 2,900 Nm
Tolerant cutting force 1,404 Nm
Rotary angle +30°-120°
C axis table Rotary axis
Worktable area Ø600 sq.500
Center bore diameter Ø60H7 mm
Min. input increment 0.001°
Load capacity 500 kg
Total speed reduction ratio 90/1
Max. table rotation speed 33 rpm
Positioning accuracy ±8 sec
Repeatability accuracy ±5 sec
Clamping torque 2,300 Nm
Tolerant cutting force 729 Nm
  • Above specifications are based on Siemens controller, Heidenhain, Fanuc and Mitsubishi controllers are available.
  • All specifications, design and characteristics are subject to change without prior notice.

Standard Accessories

  • Coolant system
  • Work lamp
  • Toolbox
  • Spindle air blow system
  • Chip air blow device
  • Oil-mist cooling system
  • Air conditioner for electrical cabinet
  • MPG
  • M30 work end indication light
  • Full enclosed splash quard
  • Automatic lubrication system
  • Operation and maintenance manual
  • Leveling bolts and pads
  • Internet function
  • Spindle heat compensation system
  • Caterpillar type chip conveyor and chip cart
  • A,C axis optical scale
  • Two screw chip conveyor equipped at the base
  • Coolant inner 3 axes ballscrew
  • Operator standing platform
  • Coolant system

Optional Accessories

  • 3 axes optical scale
  • Oil skimmer
  • Oil-mist collector
  • Coolant through spindle
  • Auto tooling measurement
  • The automatic parts measurement device
  • Remote monitoring system