GT-HTA2500 /GT-HTA3000

High Speed 5-Axis Machining Center
GT-HTA2500 /GT-HTA3000
Feature

Optimal Structural Design

  • Double column structure features ultra-high stability in high speed machining.
  • The table is independently installed on the base and fully supported by 3 roller-type linear guide ways through the entire stroke, assuring maximum accuracy and dependability.

One-piece Constructed Columns

  • The specially designed double-column, high speed machine structure combined with one-piece constructed column fully exhibit structural rigidity and stability during heavy cutting.

Three Axes Linear Guide Ways

  • Roller type linear guide ways on three axes feature higher feed rate, resist heavier loads and ensure superior dynamic accuracy and long service life.
  • X,Y-axis is equipped with 3 linear guide ways for superior rigidity.

Servo Motor Drives on 3 Axes

  • Three axes are driven by powerful servo motors. Their power can reduce machining time for large molds and increase profitability.

Deformation Free

  • All casting parts are stress relieved and treated for lifetime accuracy without any deformation.
  • Rapid feed rate on X, Y, Z-axis : 20 / 15 / 20 m/min
  • Cutting feed rate on X, Y, Z-axis : 20 / 15 / 20 m/min
  • Positioning accuracy: 0.003 / 300 mm (ISO-230-2)
  • Repeatability: ±0.003 mm (ISO-230-2)
Specification
MODEL 　
Travel (X, Y, Z) 2500 x 2470 x 850 mm
Cutting feedrate 20 / 15 / 20 m/min
Rapid feedrate 20 / 15 / 20 m/min
Table area 2800 x 1600 mm
Max. Load of table (average load) 10,000 kg
Max. Spindle speed 18,000 RPM
Type of spindle motor Built-in
Bearing Iubrication Oil-Air
Spindle cooling Water-cooling
Spindle taper HSK-A63
ATC capacity 24 tools
Tilting angle A axis ± 115°
C axis ± 220°
Drive Direct drive motor
Speed  30~40 rpm
Max. Torque 800 Nm
Positioning(indexing) accuracy  ± 10 sec
Repeatability  ±  7 sec
  • Above specifications are based on Siemens controller, Heidenhain, Fanuc and Mitsubishi controllers are available.
  • All specifications, design and characteristics are subject to change without prior notice.
Accessories

Standard Accessories

  • Coolant tank
  • Work lamp
  • Tool box
  • Coolant pump
  • Coolant system
  • Spindle cone air blast
  • Air conditioner for electrical cabinet
  • M.P.G
  • Pilot lamp
  • Spindle thermo compensation function
  • Caterpillar type chip conveyor and chip cart
  • Central lubrication system
  • Operation and maintenance manuals
  • Leveling bolts and blocks
  • Two chip augers beside work table
  • Ethernet socket
  • X,Y,Z axes optical scale
  • A,C axes angle encoders

Optional Accessories

  • Oil skimmer
  • Automatic tool length measurement
  • Automatic workpiece measurement
  • Coolant through spindle
Back